RCF spa
ART 9-AX Reference Guide
6
Mixer (home)
MIXER View is the default page which shows up when the mixer is powered on or exits from the idle state.
To change the value of any fader on this page, touch the fader once and use the encoder to
modify its current value; the encoder highlights in yellow and the current value is shown in
yellow above the encoder itself.
To enter the EDIT pages of input channels, touch buttons
To enter the EDIT page of the MAIN output, touch button
To enter the SETTINGS pages, touch button
To enter the BLUETOOTH setup page, touch button
The center lower section of this page contains several details:
Please note that if a fader is set to its minimum value (-infinity), it
turns red to indicate a muted state. This can be useful when
controlling from the LiveRemote smartphone app, which also
features a MUTE button.
Gesture
:
a right-to-left swipe jumps to the REVERB page
.
Reverb
Path
: SETTINGS > SYSTEM SETTINGS > AUDIO SETUP > REVERB
The internal stereo Reverb can be applied to all inputs. Three presets are available: SMALL, MEDIUM, LARGE.
A global Effect Return level control is available (FX RTN), affecting the reverb amount mixed into the stereo L/R buss.
A global Reverb ON/OFF is also available. When Mix OUT mode is set to MONO, Reverb outputs are summed to mono.
Gesture
:
A left-to-right swipe returns to Mixer view, only if reached with the opposite gesture; when the Reverb page is reached with navigation,
a top-to-bottom gesture returns to Mixer View. The two cases differ by the lower left button (see above).
current edit value
current MIX OUT mode
current EDIT mode (EASY/ADVANCED)
