RCF spa
ART 9-AX Reference Guide
5
3.
MIXER EDIT
Channel Edit modes: Easy and Advanced
The internal digital mixer is a versatile processing system that in some
cases may be too complex for immediate operation; therefore, the EDIT
mode can be set in EASY or ADVANCED; to modify the EDIT mode, go to
SETTINGS ( )from the Home Page, and press EASY/ADVANCED, a popup
will appear, with confirmation required.
The EASY EDIT mode is assuming the user is operating in MONO MIX OUT
mode, without full processing control:
EDIT mode
EASY
ADVANCED
MIX OUT mode
MONO MAIN or
MONO XOVER
All modes
Input EQ
No
Yes
Input Dynamics (Ch. 1, 2)
No
Yes
Input Pan/BAL
No
Yes
Input 48 V, sensitivity set
Yes
Yes
Output EQ
No
Yes
Reverb
Yes
Yes
The current mode is displayed on MIXER view, at the center lowest row, and also in the edit pages backround:
Mixer View
CH 1 or 2 Edit
Ch 3/4 or 5/6 Edit
MAIN Edit
Touch Screen Gestures
On some pages, gestures are enabled to allow a faster navigation. A 3-dot graphical
element helps in understanding if a gesture is available.
As an example, on the MIXER view, a right-to-left swipe is available for jumping to
the Reverb page, as shown on the right.
In this document, when a gesture is available, it will be detailed for each of the
pages affected.
Here is a summary of available gestures:
FROM
Gesture
TO
Mixer View (home page)
Right to Left
Reverb page
Reverb page
(only if reached with the gesture above)
Left to Right
Mixer View (home page)
Input Channel Edit, page 1 or 2 ((Ch. 1, 2)
Input Channel Edit (Ch. 3-4, BT)
Top to Bottom
Mixer View (home page)
Input Channel Edit, page 1 (Ch. 1, 2)
Right to Left
Goes to page 2 (equivalent to
>
button)
Input Channel Edit, page 2 (Ch. 1, 2)
Left to Right
Returns to page 1 (equivalent to
<
button)
Output Edit
Top to Bottom
Mixer View (home page)
System Settings and subpages
(except LOAD/SAVE, CROSSOVER)
Top to Bottom
Mixer View (home page)
Step-by-Step Configuration
(not on subpages)
Top to Bottom
Mixer View (home page)
