RCF spa
ART 9-AX Reference Guide
14
On the DUAL PRIMARY speaker, you can also enable input level links of inputs 1, 2 and BT: this
will gang input levels on both speakers. This option is useful when you are sending audio from
an external source, i.e. a stereo mixer, avoiding left/right balance loss.
These settings are automatically imposed to the SECONDARY speaker, to make sure the system
is consistent.
When selecting PRIMARY Bluetooth mode, the speaker tries to connect to an available
SECONDARY speaker. If this fails, the DUAL CONNECT button forces an explicit connection trial.
CLEAR LIST dismisses all previously paired smartphone, so that a connection sequence can be
restarted again.
When setting the Bluetooth PRIMARY mode, some options are
available:
On the LiveRemote app, PRIMARY and SECONDARY speakers are
visible, but only PRIMARY (and of course SINGLE) speakers can be
selected for connection:
The DUAL system is set in LEFT/RIGHT mode; Bluetooth audio is
running in stereo (one channel per speaker), and MAIN output level
of the speakers are linked.
You can use this setting to maintain a proper stereo image.
You can swap L and R channels by changing label assignment (which
is PRI = LEFT, SEC = RIGHT by default).
The DUAL system is set in ZONE mode; Bluetooth audio is summed to
mono and sent to both speakers. MAIN output levels are
independent.
You can use this setting to allow independent level control of the two
zones.
You can swap ZONE 1 and ZONE 2 by changing label assignment
(which is PRI = ZONE 1 , SEC = ZONE 2 by default).
Troubleshooting the Bluetooth connection
If for some reason the LiveRemote app is not connecting to the speaker, there may be three possible actions to follow:
1)
Device Scan list on the LiveRemote app is showing an outdated list: please press SCAN again to verify device presence
2)
The speaker is already connected to another smartphone: please double check
3)
If the connection fails, there is the possibility to clear all connections, both saved and current, by clicking on CLEAR LIST. After
performing a CLEAR LIST, redo the SCAN on LiveRemote and connect to the desired unit. CLEAR LIST is available in all Bluetooth modes.
