RCF AM 1064, Owner'S Manual

Page: 8 / 24

8
ENGLISH
REAR PANEL
}
MUTE CMD Mute command: if the 2 contacts are short, the audio input 1 gets
priority over the other inputs.
q
Audio input 1 VOX function ON / OFF switch.
The ‘VOX’ function automatically gives priority to the audio input 1 whenever a signal is
detected at its input .
w
hen The audio inpuT
1
prioriTy is in progress
,
all The oTher audio inpuTs are muTed
(
BuT The
aux
in,
for which iT is possiBle To adjusT iTs level By Turning The
ducking
conTrol
A
).
w
MIC./PH./LINE
Audio input 1 MIC/LINE and ‘Phantom’ switch.
MIC.
PH.
LINE
Audio input sensitivity set to MIC. The ‘Phantom’ power supply is disabled.
Use: dynamic microphones.
Audio input sensitivity set to MIC. The ‘Phantom’ power supply is enabled.
Use: electret microphones.
Audio input sensitivity set to LINE. The ‘Phantom’ power supply is disabled.
Use: ‘line’ level signal.
AM 1125
AM 1064
H G F D S A ] [p o i u y t r e w q }
H G F S A ] [ p o i t r e w q }