RCF AM 1064, Owner'S Manual

Page: 10 / 24

10
ENGLISH
[
PRE OUT audio output (with RCA connector) that sends the same signal routed to
the internal amplifier.
u
se
pre ouT
To connecT eiTher addiTional exTernal amplifiers or an audio recorder
.
]
MAIN IN audio input (with RCA connector) to connect an external device directly to
the internal power amplifier.
imporTanT:
Before using This inpuT
,
iT is necessary To seT The inTernal
jp1
jumper from
‘inT’
(
inTernal preamplifier
)
To
‘exT’.
T
his change can only Be made By an
rcf
auThorized service cenTre or qualified personnel
.
A
DUCKING Control to adjust the AUX IN level when the audio input 1 priority is in
progress.
S
Amplifier output to loudspeakers, available as:
-
100 / 70 V constant voltage line
-
Low impedance (min. 4
Ω
).
Use 1 output only (see the manual section ‘Loudspeaker connection’).
Max. output power is 120 W (AM 1125) / 60 W (AM 1064).
D
(AM 1125 only) Input for the secondary 24 V dc power supply (batteries), necessary
to ensure the amplifier operation even if the mains supply is unavailable.
Make sure the connection po / – is correct and use a cable having wires with a
suitable section (at least: 2.5 mm²).
W
arning
:
use external
DC
poWer sourCe With
15a
Current rating proteCtion faCility
.
F
Mains connector with fuse.
Before connecting the power cord, verify the mains voltage (either 230 V or 115 V ~)
corresponds to the amplifier operating voltage set by the respective selector
H .
AM 1125
AM 1064
VOLTAGE: 230 V
T2.5AL 250V
T1.6AL 250V
VOLTAGE: 115 V
T5AL 250V
T3AL 250V
G
Additional earth screw terminal.
T
he meTallic parTs of The uniT are earThed By means of The power cord
.
a
n apparaTus wiTh
class i
consTrucTion shall Be connecTed To a mains sockeT ouTleT wiTh a
proTecTive earThing connecTion
.
H
Operating ac voltage selector (either 230 V or 115 V).
warning:
a wrong seTTing can damage The amplifier
!
FUSE