13
Using the Remote Control
CHANNEL
Up or Down
Selects next higher or lower
channel in the TVÕs channel
memory when remote is set to
control a TV.
CLEAR
Removes menus or status displays
from the screen.
DISPLAY
Shows the status displays on the
screen.
Removes menus or displays from
the screen.
MUTE
Turns the TV sound on or off.
Numbers (0 through 9 )
Select a channel up to 99 by
pressing two numbers.
Select a cable channel over 99 by
pressing and holding
1
until
1– –
appears on the screen. Then press
the other two numbers.
POWER
Turns off a compatible TV when
remote is set to control TV.
Used with
TV
button to turn on a
compatible TV, other than RCA,
when the remote is programmed to
control that TV.
See page 11.
PREV CH (
Previous Channel)
Switches between two channels.
Select one channel and then use the
number buttons to select another.
Press
PREV CH
to switch between
the two channels.
Works as an
ENTER
key on some
TVs.
SLOW – / +
Used with the TVÕs menus to select
and adjust features.
VOLUME
Up and Down
Raises and lowers sound.
RECORD
Starts VCR recording.
Used for express recording (XPR).
See page 27.
REW
(Rewind)
Rewinds the tape when the VCR is
stopped.
Searches the picture in reverse
motion during playback.
SEARCH
Displays
INDEX, GO-TO,
and
BLANK SEARCH
menus on TV.
Lets you advance tape 60 or 120
seconds during playback.
SLOW – / +
Used for slow-motion playback.
SPEED
(Tape Speed)
Selects a recording speed
(
SP, LP,
or
SLP
).
STOP
Stops the normal functions such as
record, playback, rewind, fast
forward, and pause.
TRACKING
Up and Down
Lets you manually reduce the
streaks that may appear on the
picture during play or pause.
Reduces picture ÒjitterÓ during
stop-action playback.
TV•VCR
Switches the picture signal so
that it either comes from the VCR
or the TV channel.
See page 10.
VCR Function Buttons
(continued)
TV Function Buttons
Press the
TV
button to set remote to control a compatible TV. Some buttons may not work with every TV.
Buttons
