23
References
Location of Controls
Back Panel
3CH.4
Switch
Selects the channel to which you tune the TV to see
the VCR picture if you connect the VCR using one
of the basic hookups.
IN FROM ANT.
(Antenna) Connector
Receives a signal from an antenna or cable system
when attached.
OUT TO TV
Connector
Passes signal to TV using the cable supplied.
VIDEO1 IN
and
AUDIO1 IN
Jacks
Receive signals from another component like a
VCR or camcorder when it is connected to these
jacks. Use
INPUT
(or channel 00) on the remote
to select.
VIDEO1 OUT
and
AUDIO1 OUT
Jacks
Send signals from VCR to another component like
a VCR or camcorder when it is connected to
these jacks.
OUT TO TV
IN FROM
ANT.
VHF/UHF
3 CH. 4
IN
AUDIO1
VIDEO1
IN
OUT
OUT
POWER
Indicator
Lights when the VCR is turned on.
RECORD
Indicator
Lights when the VCR is recording.
TIMER
Indicator
Shows VCR is set for timer recording when VCR is
turned off.
Flashes when the clock is not set.
Flashes when a timer recording is set and there is
no cassette in the VCR.
POWER
VCR
TIMER
RECORD
Display Panel
VCR
Indicator
Lights when using the
TV•VCR
button.
When using one of the basic hookups:
•
The picture is coming from the VCR when the
VCR
indicator is on.
•
The picture is coming from the television
channels when the
VCR
indicator is off.
