background image

Using the TV/VCR’s Features

32

Chapter 3

Audio Features

The audio you select affects both tape playback and recordings.

Note:

 

The TV/VCR must be properly connected to a stereo system using audio/video cables

to hear stereo sound.

Press the SOUND button on the remote to select the type of audio you want to listen to or
record. You can use the 

AUDIO ADJUST 

menu in the next chapter to adjust the sound.

Reception

Some TV programs are broadcast with stereo audio or a Second Audio Program (SAP) which
offers a second language. The SOUND button on the remote lets you select the type of audio
you want to listen to or record. Press the SOUND button on the remote repeatedly to switch
between 

STEREO

SAP 

or

 MONO

.

STEREO

Used to hear/record normal or stereo broadcast TV. 

ST

 appears on the TV

screen when stereo is being broadcast.

SAP

Used to hear/record a Second Audio Program. 

SAP

 appears on the TV screen when

stereo is being broadcast. Records the selected audio (SAP or Main).

Mono

Used to hear/record monoaural sound.

Note: The TV/VCR defaults to mono if the stereo signal is weak, too noisy, or the
program isn’t being broadcast in stereo (no indicator appears on the screen).

Tape Playback

The VCR records audio on both the Hi-Fi stereo and linear tracks on the tape. Hi-Fi sound is
recorded on separate left and right stereo channels. Monaural sound is recorded on the linear
track. Records the audio (SAP or Main) selected with the SOUND button. To enjoy Hi-Fi sound,
connect your TV/VCR to a stereo system using the audio jacks.

Note:

 

Tapes recorded on a mono VCR will automatically be played back in linear audio.

Press the SOUND button repeatedly to switch between 

LR, L, R

, or mono (no display).

      

         (Hi-Fi)

Used for normal playback. Both the left and right channels will be

played from the audio track.

(Hi-Fi)

Used to hear the left channel of the Hi-Fi track played through both speakers.

(Hi-Fi)

Used to hear the right channel of the Hi-Fi track played through both

speakers.

LINEAR (No Display)

Used to play back the sound recorded on the linear monaural

track, such as a Second Audio Program, or a dubbed voice-over.

L      R

L

R

Summary of Contents for TV/VCR Combo

























































Reviews: