RCA Scenium D32TF20, User Manual

Page: 16 / 80

Connections & Setup
14 Chapter 1
RF Jack and Coaxial Cables (F-type)
The RF jack is necessary for reception of off-air broadcasts, cable, and satellite
signals.
This jack is required for antenna or cable connections. The RF jack on the TV is
labeled ANTENNA/CABLE INPUT.
An RG-6 coaxial cable is required for all satellite signal distribution.
Audio Output Jacks and the External Speakers Jacks and Switch
These jacks are used to connect your TV to an audio receiver or other audio
processing component. The two types of jacks you can use for audio output are
fixed and variable. You can also connect external speakers directly to the TV, if
you want to use the TV’s audio processor.
The FIXED jacks provide fixed-level audio output from the TV. This audio
output is ideal for connecting to an A/V receiver when you want to control the
volume through the A/V receiver.
Note: If you use the FIXED AUDIO output jacks, you may want to turn off
the volume display in the Audio menu.
The VARIABLE jacks provide variable-level audio output. Volume levels are
controlled by the volume controls on the TV and remote control.
The EXT SPEAKERS jacks let you connect external left and right speakers to the
TV. The EXT/INT switch beside the jacks lets you turn the TV’s internal
speakers on or off. EXT sends audio to external speakers only. INT sends audio
to the TV’s internal speakers only.
High Resolution Input Jack and Cables
This jack lets you connect your TV to an RGB or component video device
(Y•Pb•Pr). How images are displayed, however, depends on other factors such
as the type of device connected to the TV and the media being transmitted.
Notes:
• Remember to connect the left and right audio cables because the
high resolution cable carries only the picture signal, not the sound.
• The TV automatically detects when a component is connected to the
HIGH RESOLUTION INPUT jack. To connect a component video device
to this jack, you need to use the supplied RGB-component video
adapter cable. The TV automatically detects and displays the
component video signal.
AUDIO OUTPUTS
FIXED VARIABLE
L R L
R
EXT SPEAKERS
EXT
INT
L R
+ +
RF Jack
AUDIO INPUTS
L R
HIGH RESOLUTION
INPUT