6
Sound Features
Preset Equalizer Curves
Press
PRESET EQ
on the main unit or
EQ
on the
remote to toggle among FLAT, ROCK, POP, JAZZ,
CLASS and CUSTOM. The display shows the selection
briefly.
Creating Custom Curve
1. Press
PRESET EQ
to select
CUSTOM
mode.
2. While
"
CUSTOM
" is displayed, press
DIGITAL
TUNING /
to cycle among displayed
bass- and treble - range levels.
3. While
BAS
or
TRE
is
displayed, adjust
VOLUME CONTROL
to
set the associated gain
between -10 - +10.
BASS BOOST
Press
BASS BOOST
to turn on/off boosting the bass
frequency.
Muting Audio
Press MUTE
on the remote to cut the sound.
(Remote Only)
EN
CD Player
Note:
Be sure to remove all discs from the disc
compartment before moving or transporting the
unit!
Loading Discs
1. Press
SOURCE
repeatedly to select
CD
mode.
2. Press
OPEN/CLOSE
to open the drawer.
3. Insert up to five discs with label face up. (Press
DISC SKIP
to rotate the disc carrier.)
4. Press
OPEN/CLOSE
to close the drawer.
Loaded disc position icon lights.
Playing Discs
•
Press PLAY/PAUSE
to begin or pause play,
and
STOP
to stop play.
• Press SKIP BACKWARD
/ SKIP FORWARD
to select a specific track.
Tip:
While playing a CD, press and hold SKIP-
FORWARD or BACKWARD for more than 2 seconds
to search through the CD.
This unit is compatible with
CD-RW/ CD-R discs for play-
back.
Notes on CD-R/RW Disc:
• Do not affix any type of labels to either side
(recordable or labeled side) of a CD-R/RW disc
as this may result in the unit malfunctioning.
• To avoid damages to the CD-R/RW disc, do not
open the disc compartment door while the
disc is being read.
• Do not load an unrecorded CD-R/RW disc into
the unit. This may take a longer time to read
the disc.
• Playback capability for CD-RW discs may
vary due to variations in the quality of
the CD-RW disc and the recorder used to
create the disc.
CD-R / RW
BAS+08
MUTE
RS2635_40-EN 23_12 12/23/03 2:23 PM Page 10
