EN
Troubleshooting tips
Unit doesn’t turn on
• Check that batteries are properly
inserted and not exhausted.
• Make sure battery compartment door
is properly closed.
• Make sure the
LOCK
function is not
activated.
Display keeps flashing when unit is
off
• You have not set the time. Refer
to section on Time Setting.
Cannot record
• Make sure the
LOCK
function is not
activated.
• Make sure the memory is not full.
• Check the total files in all folders
not exceeding 198.
• You have recorded 99 files in one
folder. Try record in a new folder.
Cannot show recording date and
time during playback
• You have not set the date and
time before recording. Refer to the
section on ‘Time Setting’.
No sound from the speaker during
playback
• Make sure the volume level is not set
to 0.
• Headphones is connected.
Cannot activate the unit after
pressing ON keys
• There may be software problem.
Remove batteries and wait for 30
seconds to reset the unit, then re-
install batteries and try again.
Recordable time
becomes shorter
• You have set the recording
quality to ‘High Quality’, refer to
section ‘Setting Recording Quality’.
Cannot perform playback
• Make sure you have selected folder
with recorded messages.
• Make sure the
LOCK
function is not
activated.
Cannot erase recorded file(s)
• Make sure you follow each step
under section “Erasing Selected File”
carefully.
13
Summary of Contents for RP5011
Page 1: ......
