12
Inserting a Tape
A
A
TAPE
PLAYBACK
RECORD
PLAY
PLAY
STOP
/EJECT
STOP
/EJECT
TAPE
PLAY / REC
RP-9340
AUDIO SYSTEM
Using the Cassette Deck
knowing the cassette deck Buttons
If you know what each button does, it’s easy to figure out how to operate the
tape deck.
RECORD — Press to record from the radio, another cassette tape or from
CDs.
PLAY — Press to play cassettes.
REWIND
— From stop mode, press to rewind the tape toward the
beginning.
FAST FORWARD
— From stop mode, press to advance the tape toward the
end.
STOP/EJECT — Press to stop current tape activity, or to open the cassette
compartment door when no buttons are active.
PAUSE — Press to interrupt tape play or record. Press a second time to
resume tape play or tape record mode.
Playing Cassette Tapes
1.
Press the TAPE function button to activate the cassette deck.
2.
Press STOP/EJECT to open the cassette compartment door.
3.
Insert a tape into the compartment door, and then close the door securely.
4.
Press REWIND or FAST FORWARD to move tape to the desired starting
point.
5.
Press PLAY to begin playing the tape.
playing two tapes in sequence
1.
Insert a tape into each of the tape compartments and close the tape doors.
2.
Press the TAPE Function button.
3.
Press the PLAY button on Deck 2.
4.
Press the PLAY button and then the PAUSE button on Deck 1.
5.
When the tape in Deck 2 reaches the end, it will stop and tape Deck 1 will
automatically begin playing.
Erase Protection
When you record new material, the cassette deck records over whatever is on a
tape. To protect a tape from accidental erasure, break off one or both plastic
tabs (one for each tape side) on the top of the cassette tape. If you decide later
to record on the tape, seal the hole with a piece of cellophane tape.
A
60
A