RCA RLC4283A User Manual Download

Page: 30 / 39

Chapter 3 Using the TV



Press the button to turn the TV on.



Press the

MENU

button on the remote control to display the Main menu, and use the

◄► buttons to select

CHANNEL



Use the

▲▼

buttons to highlight an individual

CHANNEL

option, use the ◄► buttons

changes the setting, and press the

MENU

button to exit the menu.



The

CHANNEL

menu includes the following options:

Channel List

Press the OK button to display the Channel List.

Favorite List

Press the OK button to display the Favorite List.

Channel Settings

Allows ADD/RENAME/MOVE/FAVORITE of channels on the channel

list. Press the OK button to enter the Channel Settings menu.

Customizing the CHANNEL Settings

Channel List

Favorite List

Channel Setting

Auto Channel Search

Execute

CHANNEL

:Select Menu

:Go to Next Menu

:Return

MENU

The available menu items are dependent on the input source being
selected.All illustration is for reference only. If AV, PC,YPBPR,HDMI,TV
source’s menu items are not available, they will be shown in gray.



Set up channel list



Press

◄►

buttons on the remote control to select channel, then

press ▲▼ buttons to add the selected channel in Channel List.



Press the OK button to set, a icon will appear, press OK

button again to disable.



Set up channel label

Press ▲▼ buttons to select channel, then press the OK button

to enter the channel label menu.



Set up favorite channel



Press

◄►

buttons on the remote control to select channel, then

press ▲▼ buttons to add the selected channel in Favorite List.



Press the OK button to set, a icon will appear, press OK

button again to disable.

CHANNEL SETTING

Channel Number

In Channel List

Channel Label

Favorite Channel

:Select Menu

:Select Channel

:Return

MENU

CHANNEL SETTING

Channel Number

In Channel List

Channel Label

Favorite Channel

:Select Menu

:Select Channel

:Return

MENU

Signal Type

Allows selection between CATV cable and antenna signal sources:

AIR/Cable

Auto Channel Search

Press the OK button, the Channel Scanning automatically creates

a list of receivable channels.

Summary of Contents for RLC4283A








































Search results

Summary of Contents for RLC4283A

Reviews:

Related manuals for RLC4283A

Brands by name

Popular brands

RCA RLC4283A, User Manual

Search results

Summary of Contents for RLC4283A

Reviews:

Related manuals for RLC4283A

Brands by name

Popular brands