!
3. If you are programming the remote to control your TV,
satellite receiver or cable box, go directly to step 5.
4.
To program the remote to control a VCR or DVD.
The
VCR•DVD
key can control only one component, either your
VCR or your DVD. To program your remote to control either
your DVD or your VCR, you must first put the remote in
the proper programming mode. Follow these directions
before proceeding to step 5.
a. Press and hold the
VCR•DVD
key. The illuminated
ON•OFF
key turns on.
b. While holding down the
VCR•DVD
key, press and
release the number 2 key on the
keypad to control a VCR or the
number 3 key to control a DVD.
The illuminated
ON•OFF
key
turns off.
c. Release the
VCR•DVD
key. The
illuminated
ON•OFF
key blinks
four times and then turns off.
Your remote is now either in
VCR or DVD Programming
Mode, depending on which
you chose. Proceed to step 5.
5. Press and hold the component key
(
TV
,
VCR•DVD
,
SAT•CBL
) you
wish to program. The illuminated
ON•OFF
key turns on and
remains on.
6. While holding the component key
down, press and hold the
ON•OFF
key. The illuminated
ON•OFF
key turns off.
7. After holding both keys down for
three seconds, the illuminated
ON•OFF
key turns back on.
8. Release both keys. The illuminated
ON•OFF
key remains on.
9. Refer to the Brand Codes in the
enclosed Code Lists. Press and
release the appropriate brand code
key, using the number keys on the
keypad. The illuminated
ON•OFF
key blinks once.
TIP:
Throughout the programming
of each key, be sure to keep the remote
pointed at the IR sensor of the
component you are currently
programming the remote to control.
10. Press and release the
ON•OFF
key
repeatedly until your component
turns off. Wait 4 seconds between
each key press. Each time you press
the
ON•OFF
key, the illuminated
ON•OFF
key blinks, and the next
code is sent. The Brand Code
Search begins with the first code in
the chosen brand list for that
component and cycles through all
the codes for that brand. If your
component turns off, you have
found the correct code. (If it cycles
through and the illuminated
ON•OFF
key blinks four times and
turns off, all codes in the chosen
brand lists have been searched. The
Brand Code Search mode is exited.)
VCR
•
DVD
VCR
•
DVD
ON
•
OFF
VCR
•
DVD
ON
•
OFF
SAT
•
CBL
VCR
•
DVD
TV
ON•OFF
(BLINK)
ON•OFF
(BLINK)
ON•OFF
(BLINK)
5
ON•OFF
ON•OFF
(BLINK)
RCR311S_NA_IB_REVB_K4.qxd 7/27/04 11:41 AM Page 5
