Chapter 2
17
Using the Remote Control
MUTE
Reduces the HD Monitor’s volume to its minimum level. Press again to
restore the volume.
OK
When in the menu system, selects highlighted items. During normal viewing
(without the menu on the screen), freezes the picture until you press any button
on the remote to resume normal viewing. Please note that when you "unfreeze"
you go back to live programming (skipping any programming that occurred during
the freeze).
ON•OFF
When in TV mode, turns the HD Monitor on and off. If in another
device mode (DVD or AUX•HD) and programmed, will turn the device on and off.
When pressed twice within two seconds, the ON•OFF button turns off most RCA
devices.
PRESETS
Displays the Picture and Sound preset settings. Use the up and down
arrow buttons to highlight either Picture or Sound settings. Use the left and right
arrow buttons to change to a different Picture or Sound preset.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE
If programmed, provides
transport control for some remote-controllable VCRs and DVD players.
SLEEP
Displays the Sleep Timer. Each press adds an additional 15 minutes.
SKIP
Press once before changing inputs and the HD Monitor will wait 30
seconds before returning you to the original input. Press repeatedly to add more
time.
TV
Turns on the HD Monitor and puts the remote in TV mode. Also displays
current status.
VOL – or VOL +
Decreases or increases the HD Monitor’s volume.
Front Panel Buttons
If you cannot locate your remote, you can use the front panel buttons of your HD
Monitor to operate many of the HD Monitor’s features.
Note:
The DVD and AUX•HD buttons also turn on
most RCA products.
Tip
To turn off all the RCA devices connected to
the HD Monitor, press ON•OFF twice within
two seconds.
This feature works with most RCA products.
Tip
The indicator fl ashes when the remote
batteries are low and you press a button on
the remote.
A warning banner may also appear on the
screen when you press a remote button and
your batteries are low.
MENU/OK
Brings up the Main menu. In the menu system, it selects highlighted
MENU/OK
MENU/OK
items.
CH
Scans down through the input list. In the menu system, acts like down
arrow button on the remote control and adjusts menu controls.
CH
Scans up through the input list. In the menu system, acts like up arrow
button on the remote control and adjusts menu controls.
VOL
Decreases the volume. In the menu system, acts like left arrow button on
the remote control and adjusts menu controls.
VOL
Increases the volume. In the menu system, acts like right arrow button on
the remote control and adjusts menu controls.
POWER
Turns the HD Monitor on and off.
CH
CH
VOL
VOL
MENU/OK
