8
9
Route the power wires and/or wire
leads into the wall.
Align the holes on the video
doorbell’s body with the holes
in the mounting plate. Insert the
screws provided through the
video doorbell’s body and into the
mounting plate. Tighten these screws
completely.
Install the video doorbell on the mounting plate
12
Install the faceplate of your choice
14
Place the faceplate of your choice
onto the front of the video doorbell
as shown here. Insert the 2 provided
set screws into the bottom of
the video doorbell to secure the
faceplate.
Peel off the QR code sticker from the front of the
video doorbell and store it in a safe place
13
QR code
sticker
Peel off
Gently peel off the QR code sticker
from the front of the video doorbell.
Make sure you put it in a safe place—
you’ll need it to complete setup!
Summary of Contents for HSDB2
Page 43: ...43 nectan léctrico a el ...
