Connections & Setup
18
Chapter 1
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
SVGA INPUT
AUDIO
VGA/SVGA/XGA
WIRED
REMOTE
CONTROL
(IR)
For Factory
use only
INPUT 2
COMPOSITE
VIDEO
L
R
INPUT 1
COMPONENT/COMPOSITE
Y/VIDEO
P
B
P
R
L
R
S-VIDEO
DIGITAL
AUDIO
OUTPUT
VIDEO
L
R
Y/VIDEO
P
B
P
R
L
R
S-VIDEO
INPUT 3
COMPONENT/COMPOSITE
INPUT 4
COMPOSITE
FIXED/VARIABLE
HDMI 1 INPUT
HDMI 2 INPUT
CABLE
INPUT
ANTENNA
INPUT
L
R
E
FIXED/VARIABLE
FIXED/VARIABLE
DIGITAL
AUDIO
OUTPUT
DIGITAL
AUDIO
OUTPUT
(OPTICAL)
FIXED/VARIABLE
AUDIO OUTPUT
White
Red
Audio cables are color
coded- Red= right
audio; white= left
audio
Digital Optical
cable
Advanced Audio Connection Information
With the audio versatility of your HDTV, you can choose various connection options depending on the type
and quality of sound that you want. From good to best sound, choose one of the options or refer to the user’s
manual of each device that you are connecting to get the best results.
•
Use your TV’s internal speakers (good sound).
•
Connect an audio receiver (speakers connected to receiver) to your TV (better sound).
•
Connect an audio receiver (speakers connected to receiver) to your TV using the DIGITAL AUDIO OUTPUT
(OPTICAL) jack (best sound)
Connecting Your TV to an Audio/Video Receiver
For better sound quality than the TV’s internal speakers, connect to an audio receiver using audio cables to the
TV’s AUDIO OUTPUT jacks.
•
Use the FIXED/VARIABLE AUDIO OUTPUT for a more advanced connection. Connect the FIXED/
VARIABLE AUDIO OUTPUTS from the TV to an A/V receiver using audio cables.
Be sure to go to the
Fixed/Variable Out
screen in the
Advanced Audio
menu and select whether you want the
FIXED/VARIABLE AUDIO OUTPUT jacks to send fi xed or variable volume audio.
• Variable Output provides variable-level audio output. Volume levels are controlled by the TV’s volume.
• Fixed Output provides fi xed-level audio output from the TV. This audio output is ideal for connecting
to an A/V receiver that has its own volume control.
Connecting Your TV to a Receiver with Dolby
®
Digital
If you own a receiver with Dolby
®
digital decoding or PCM (Pulse-Code Modulation) that uses an optical cable-
type input, connect an optical cable for excellent audio quality.
•
Connect one end of the optical cable to the DIGITAL AUDIO OUTPUT (OPTICAL) jack on your TV and
to the Digital Optical Input jack on your receiver/amplifi er receiver.
• If your receiver can decode Dolby digital and PCM, go to the
Audio
menu, select
Advanced Audio
menu, then
Digital Audio Outpu
t. Select
AutoSelect
(recommended) or
PCM
.
• If your receiver can decode only PCM, select
PCM
.
