48
Chapter 4
Using the TV’s Menu System
Setup Menu
The Setup menu lets you confi gure the TV to fi t its surroundings and your
preferences. To access the
Setup
menu, press MENU on the remote, and then
select
Setup
from the main menu.
Setup
Setup
Channel setup
Signal source
Allows you to set which tuner you want to search for
channels. You can select
Analog tuner
or
Analog tuner
Analog tuner
Digital tuner
to search that tuner
Digital tuner
Digital tuner
separately, or you can select
Both
to search both tuners.
Analog Signal Type
(available for the analog tuner only) The analog
signal type was set during the initial setup. If you change how you receive
broadcasts through the antenna input, you must change the
Signal type
setting. Choose
Cable
if you are using cable or a cable box for TV signals.
Cable
Cable
Choose
UHF/VHF Antenna
if you are using an off-air antenna for analog TV
signals.
Auto channel search
Searches for channels the current tuner (analog or
digital) is receiving. Go to page 19 for more information.
Auto channel update
Searches for any new channels that are not in your
channel update
channel update
channel list for the current tuner and adds them to that list.
List and labels
Edit the channels in the list or choose labels for each
labels
labels
channel. Go to page 20 for more information.
Preferences
Language
Allows you
Language
Language
select your preferred language for the menus:
English
,
Español
or
Français
.
Maximum TV volume
Allows you to set how high volume turns up when
Maximum TV volume
Maximum TV volume
you press the VOL+ button. Highlight
Maximum volume
, then press and
hold OK to hear the maximum volume. Make sure the volume has not been
muted or turned down all the way.
Curtain effect
Reveals the picture by "opening" it from the middle of the
Curtain effect
Curtain effect
screen when the TV is switched on. Hides the picture by "closing" it from
the sides when the TV is switched off.
Special features
The
Special features
Special features
Auto on
setting switches your TV on after a power
outage;
Auto channel
tunes the TV to the channel you specify as the
Auto channel
Auto channel
Initial
channel
when
channel
channel
Auto on
is enabled;
Auto volume
tunes the TV to the volume
Auto volume
Auto volume
you set in
Initial volume
when
Initial volume
Initial volume
Auto on
is enabled.
Channel setup
Go back
Signal Source
Analog Signal type
Auto channel search
Auto channel update
List and labels
Both...
Cable...
Start
Start
...
Press < / > to select where you would like to
search for channels.
Go back
Channel setup
Preferences
Closed caption
Autotuning
Convergence
...
...
...
...
...
Setup
Short-term vs. Long-term
Power Outages
The Auto channel and Auto volume settings
don’t take effect after short-term power
outages (usually less than two to three
minutes). The TV will turn back on at the same
volume and channel as before the power
outage.
The Auto channel and Auto volume settings
take effect after power outages of several
minutes or more.
Go back
Language
Maximum TV volume
Curtain effect
Special features
English...
...
Preferences
Select your language using < or > keys.
