Graphics contained within this publication are for representation only.
46
Chapter 6
Using the TV’s Menu System
Graphics contained within this publication are for representation only.
Chapter 6
47
Using the TV’s Menu System
Setup Menu
The Setup menu lets you configure the TV/DVD to fit its surroundings and your
preferences. To access the
Setup
menu, press MENU on the remote, and then
select
Setup
from the main menu.
Channel setup
Signal Type
The TV chooses the signal type during the initial setup. If you
change how you receive broadcasts through the antenna input, you must
change the
Signal type
setting. Choose
Cable
if you are using cable or a
cable box for TV signals. Choose
UHF/VHF Antenna
if you are using an off-
air antenna for TV signals.
Auto channel search
Searches for channels the signal is receiving. Go to
page 15 for more information.
Auto channel update
Searches for any new channels that are not in your
channel list and adds them to the list.
List and labels
Edit the channels in the list or choose labels for each
channel. Go to page 15 for more information.
Preferences
Language
Displays a choice list that lets you select your preferred
language for the menus:
English
,
Español
or
Français
.
Maximum TV volume
Allows you to set how high volume turns up when
you press the VOL+ button. Highlight
Maximum volume
, then press and
hold OK to hear the maximum volume. Make sure the volume has not been
muted or turned down all the way.
Curtain effect
Reveals the picture by "opening" it from the middle of the
screen when the TV/DVD is switched on. Hides the picture by "closing" it
from the sides when the TV/DVD is switched off.
Internal DVD player
The internal DVD player can be enabled or disabled.
If, for example, you're using the TV/DVD with an external DVD player,
and you've programmed the remote to work with that player, then you can
disable the internal DVD player so that it isn't activated by the buttons on
your remote. Then you can use your TV remote with your external DVD
player without the internal DVD player interfering. To enable or disable
the internal DVD player, highlight
Internal DVD player
, then press the OK
button for five seconds.
Special features
The
Auto on
setting switches your TV/DVD on after a
power outage;
Auto channel
tunes the TV to the channel you specify as the
Initial channel
when
Auto on
is enabled;
Auto volume
tunes the TV to the
volume you set in
Initial volume
when
Auto on
is enabled.
Short-term vs. Long-term
Power Outages
The Auto channel and Auto volume settings
don’t take effect after short-term power
outages (usually less than two to three
minutes). The TV will turn back on at the
same volume and channel as before the
power outage.
The Auto channel and Auto volume settings
take effect after power outages of several
minutes or more.
Continues on next page...
Note:
If Parental Controls are locked, you must enter
your password to access the Setup menu.
