RCA D52W136D - 52" HDTV Monitor User Manual Download

Page: 11 / 64

Connections & Setup

Chapter 1

Graphics contained within this publication are for representation only.

Connections & Setup

Chapter 1

Graphics contained within this publication are for representation only.

TV/DVD + Satellite Re VCR

1. Connect your VCR to your TV/DVD.

A. Connect a coaxial cable to the VCR’s antenna output and to the ANTENNA/CABLE Input

jack on the TV/DVD.

B. Connect the audio (white and red) cables to the VID2 L/MONO and R Audio jacks on the

back of the TV/DVD and to the Audio Output jacks on the VCR.

C. Connect the video cable to the VID2 V (Video) jack on the back of the TV/DVD and to the

Video Output jack on the VCR.

2. Make sure cable or antenna is connected to your VCR.

Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR.

3. Connect your Satellite Receiver to your TV/DVD.

A. Connect the audio (white and red) cables to the VID1 L/MONO and R Audio jacks on the

back of the TV/DVD and to the Audio Output jacks on the Satellite Receiver.

B. Connect the video cable to the VID1 V (Video) jack on the back of the TV/DVD and to the

Video Output jack on the Satellite Receiver.

C. If your Satellite Receiver has an S-Video jack, connect an S-Video cable (instead of the

video cable in step B) to the S-VIDEO jack on the TV/DVD and to the S-VIDEO jack on the
satellite receiver.

Go to page 14

Summary of Contents for D52W136D - 52" HDTV Monitor

































































Search results

Summary of Contents for D52W136D - 52" HDTV Monitor

Reviews:

Related manuals for D52W136D - 52" HDTV Monitor

Brands by name

Popular brands

RCA D52W136D - 52" HDTV Monitor, User Manual

Search results

Summary of Contents for D52W136D - 52" HDTV Monitor

Reviews:

Related manuals for D52W136D - 52" HDTV Monitor

Brands by name

Popular brands