11
Using Your TV and Remote
With a Satellite Receiver: Basic Operation
A. Press
SAT•CABLE
to set the
remote to control the satellite
receiver.
B. Press
POWER
to turn on the
receiver if it did not turn on
when you pressed
SAT•CABLE.
A. Press
SAT•CABLE
to set the
remote to control the satellite
receiver.
B. Press
POWER
to turn off the
receiver
.
You may also be able to use the TV’s remote with RCA satellite receivers.
Refer to your Satellite Receiver owner’s manual to hook up your Satellite
Receiver. The remote may need to be programmed for other brands of
satellite receivers, but may not operate all models of the brands listed
below. Use the codes below or on the sheet packed in with your remote.
Follow the instructions below for basic operation of your receiver. You
may also want to experiment with other buttons on the remote to see if
they work with your receiver.
Turn off the Satellite
Receiver
Program the remote for your
Satellite Receiver
A. Point the remote at the satellite
receiver and hold
SAT•CABLE
.
B. Enter the code for your brand
from the code list below.
C. Release
SAT•CABLE
.
D. Press
POWER
. If nothing
happens, try pressing
SAT•CABLE
and then
POWER
.
Turn on the Satellite
Receiver
Chaparral..........................80,81
Cheyenne...............................81
Drake.................................82,83
DSS..........................................00
GE............................................00
General Instruments...92,93,94
ProScan...................................00
RCA.........................................00
Realistic..................................84
Sierra I,II,III............................81
STS1.........................................85
STS2.........................................86
STS3.........................................87
STS4.........................................88
Toshiba...................................89
Uniden....................................90
Video Cipher II......................91
Satellite Receiver Codes
