9
Buttons
Audio/Video Receiver Function
Press the
AM•FM
button to turn on the receiver and set the remote to operate the receiver.
+
and
–
Used with
REAR•CTR LEVEL
button to adjust volume level of center and
rear speakers.
AM•FM
Turns on the receiver and toggles between AM and FM bands.
BY-PASS
Turns
By-Pass Mode
on and off.
By-Pass Mode
cancels all surround modes and
sound is produced with no surround effects.
CHAN
(Channel) Up or Down
Selects next higher or lower channel in the receiverÕs
channel memory.
CTR
(Center)
MODE
Press to toggle through the center channel modes (
Normal, Wide,
and
Phantom)
when
Dolby* Pro Logic
or
Cinema Surround
mode is selected.
DELAY/CH CTRL
Selects the amount of surround sound delay (15, 20, or 30 milliseconds)
between the main and rear speakers.
MUTE
Reduces the receiverÕs sound to its minimum level.
Numbers
(0
through
9)
Used to enter or change numbers for preset stations, and to directly
access preset stations.
POWER
Press once to turn off audio/video receiver. Press twice to turn off all components.
PREV CH•DISC
Switches between the last two stations selected. Select one station, and
then use the number buttons to select another. Press
PREV CH•DISC
to toggle between
the two stations.
RESET•REP
Used with number buttons to select or change number of preset station.
SURROUND
Advances through surround modes:
Pro Logic, Cinema, Theatre, Stadium,
Studio, Rock
, and
Simulated
.
REAR•CTR LEVEL
Toggles between the volume level adjustment for the rear and center
speakers. Use the
+
and
–
buttons to adjust volume of selected speaker(s).
VOL
(Volume) Up or Down
Raises and lowers volume of receiver.
* Dolby is a trademark of Dolby Laboratories Licensing Corp.
Using Your System Remote Control
(Continued)
