8
Using Your System Remote Control
(Continued)
+ and -
Used with the
MENU
button to select or adjust a function.
ANTENNA
Changes the antenna input between
ANT A
and
ANT B.
CHAN
(
Channel
)
Up or Down
Selects next higher or lower channel in the TVÕs channel memory.
CLEAR
Removes menus or status displays from the screen.
DELAY/CH CTRL
Press to switch channel control between main picture and PIP picture.
DISPLAY
Shows the status displays on the screen. Press repeatedly to see detailed program
information, if available.
GUIDE•RDM
Press to display previews of the channels in the channel list. It will show 12
channels at a time and sequence through all channels. Press the channel number of the channel
you want to watch or press
GUIDE•RDM
again to remove the channel guide.
INPUT•SEEK
Press to switch between inputs (
90,91,92
) and the TVÔs tuner.
MENU/PROGRAM
Displays the main menu. Repeatedly press this button to highlight the menu
item you want to access. Then press
+
or
–
to activate that menu or change that
menu item.
MOVE
Arrows (
)
Moves the inset picture when the PIP function is on the screen.
MUTE
Reduces the receiverÕs sound to its minimum level.
Numbers (
0
through
9
)
Select a channel up to 99 by pressing two numbers. To select a cable
channel over 99, press and hold
1
until
1--
appears on the screen. Then press the other
two numbers.
PIP
Brings up the small picture-in-picture window. Press again to remove the PIP window.
POWER
Press once to turn off the TV. Press twice to turn off all components.
PREV CH•DISC
Switches between the last two channels selected. Select one channel and then
use the number buttons to select another. Press
PREV CH•DISC
to toggle between the
two channels.
RESET•REP
Resets the picture controls to their original factory setup.
SKIP
Displays a count down timer on the screen. While this timer is on the screen you can
change channels to see what else is on. When the timer reaches 0:00, the TV will automatically
switch back to the channel it was on when the
SKIP
button was pressed. Press repeatedly to
increase the amount of time.
SWAP AUDIO
Not used in these systems.
SWAP PIP
Swaps the main picture with the currently selected PIP picture.
TV
Turns on the TV and puts the remote in TV mode.
TV MENU
Displays the main menu. Repeatedly press this button to highlight the menu item
you want to access. Then press
+
or
–
to activate that menu or change that menu item. Accesses
the TVÕs menu no matter what mode the remote is in.
VOL (Volume) Up or Down
Raises and lowers sound from the audio/video receiver.
Buttons
TV Function
Press the
TV
button to turn on the TV and audio/video receiver and set the remote to operate
the TV.
