11
INSTALLING THE PHONE
Installing the Handset Battery
NOTE: You must connect the handset battery before use.
CAUTION: To reduce the risk of fire or personal injury, use only the
Nickel-metal Hydride (Ni-MH) battery model T-T104 (GP, 2.4V, 550mAh),
which is compatible with this unit.
Risk of explosion if battery is replaced by an Incorrect type. Dispose of used
batteries according to the instructions.
1. Locate battery which is packaged inside a plastic bag and is separate from the
handset.
2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.
NOTE: To ensure proper battery installation, the connector is keyed and can be inserted
only one way.
4. Insert the battery pack.
5. Close the battery compartment by placing the handset back cover slightly higher than
the handset and then sliding the cover down into position.
INSTALLING THE HEADSET BATTERY
NOTE: You must connect the headset battery before
use.
CAUTION: To reduce the risk of fire or
personal injury, use only the Telefield NA
Inc. approved Li-Polymer battery Model
T-T101 (A.E., 3.7V, 240mAh), which is
compatible with this unit.
Risk of explosion if battery is replaced by an
Incorrect type. Dispose of used batteries
according to the instructions.
Summary of Contents for 25211
Page 9: ...9 Handset Layout ...
