32
Telephone Operation
Pause
Use the #PAUSE button to insert a delay in the dialing sequence of a telephone number you want to store in
memory (for example, when you must dial 9 to get an outside line, or when you must enter codes to access
your bank’s information line). Pause is displayed as “
P
.”
NOTE: You may add more than one pause if a longer delay is needed.
Out of Range Warning
When using your cordless handset, if you move too far away from the base, you will hear a long warning tone,
and the display shows
OUT OF RANGE
. This means you are out of range of the base, and you may loose the
link between your handset and base. You must move closer to the base.
Once you move within range of the base, the warning tone stops and the display returns to normal.
If you do not move into base range within 30 seconds, the handset looses its link with the base, and the base
automatically puts your call on hold.
NO LINK TO BASE
shows in the display.
Battery Low Warning
When the battery voltage level is low,
LOW BATTERY
shows in the display, and you will hear a warning beep. If
you are on the phone when the battery gets low, you will hear the warning beep every 15 seconds. Finish your
call as soon as possible; otherwise your call is put on hold after approximately five minutes and is
disconnected. You will need to use another handset to retrieve the call.
Exit
You may press the FLASH/EXIT button any time to exit the current operating mode.
Mute
Use the mute feature to turn off the microphone so you can have a private, off-line conversation.
1. During a phone call, press the MUTE button. The mute indicator light turns on.
2. To reactivate the microphone, press MUTE again.
Using Another Line During a Conversation
Base
1. If you are using LINE 1 and you receive a second call on another line, or want to make another call, press
the HOLD button to put the first call on LINE 1 on hold. The LINE 1 indicator light flashes slowly, and the
display shows
LINE 1 ON HOLD
.
2. Press the LINE 2 button make another call or answer a second call. The LINE 2 indicator turns on.
NOTE: If you are engaged in a call and you receive a second call on another line, you will hear the call waiting ringer from the speaker.
3. To return to LINE 1 and disconnect LINE 2, press the LINE 1 button.
OR
