RCA 21230 User Manual Download

Page: 28 / 68

Telephone Operation

1. Dial the number first.

2. Press the SPEAKER button and the number dials automatically. The display shows

L2, TALK SPKR

, and

the call timer.

NOTE: If you press the SPEAKER button, a free line is automatically selected.

3. When the party answers, speak into the microphone.

4. When finished, press the SPEAKER button again to hang up.

NOTE: During a speakerphone call, if you want to switch to the handset, check the display to make sure which line you’re using,
and then press the corresponding line button.

Base Speakerphone

1. Press either LINE button on the base to get a line.

2. Wait for a dial tone, and then dial the number. The display shows

TALK SPKR

, and the call timer.

1. Dial the number first.

2. Press either line button to dial out. The display shows

L2, TALK SPKR

, and the call timer.

3. When the party answers, speak into the microphone.

4. When finished, press the SPEAKER button again to hang up.

Headset

1. Insert the headset plug into the jack on the handset.

NOTE: The headset must be properly inserted into the jack.

2. Press either LINE button.

3. Dial a number. The number shows in the display, and the length of the call shows in the display.

4. When the party answers, speak into the headset microphone.

5. When finished, press the LINE button to hang up.

1. Insert the headset plug into the jack on the handset.

2. Dial a phone number.

3. Press either LINE button. The display shows

L2, HEADSET

and the call timer.

4. When the party answers, speak into the headset microphone.

5. When finished, press the line button to hang up.

Summary of Contents for 21230





































































Search results

Summary of Contents for 21230

Reviews:

Related manuals for 21230

Brands by name

Popular brands

RCA 21230, User Manual

Search results

Summary of Contents for 21230

Reviews:

Related manuals for 21230

Brands by name

Popular brands