Connections and Setup
2
Connections and Setup
Connecting Other Components to your TV
TV + DVD + VCR
1.
Connect your DVD Player to your TV.
A. Connect the audio (white and red) cables to the R and L/MONO AUDIO jacks on the back of the TV and to the
Audio Output jacks on the DVD player (sometimes labeled L and R).
B.
Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the VIDEO jack on the
back of the TV.
2.
Connect your TV to your VCR
Connect a coaxial cable to the ANTENNA IN jack on your TV and to the RF Output jack on your VCR (sometimes
labeled OUT TO TV).
3.
Make sure cable or antenna is connected to your VCR.
Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR (sometimes labeled
In From Antenna).
Note:
If you do not connect a cable, antenna, or another component to your TV, the TV will automatically
shut off after 15 minutes to save power.
DVD
L
R
VIDEO
IN FROM ANT
OUT TO TV
CH3
CH4
VCR
VIDEO
OUT
L
R
AUDIO
IN
L
R
F
rom Cable
or Antenna
TV (
back panel)
ANTENNA IN
VIDEO
L (MONO)
INPUT
1
2
R
1A
2
3
1B
16271890
8/25/03, 10:02 AM
2
