8
Linking Transmitter and Receiver
In this example, we’re using an RC4 LumenDimIO transmitter. Have both
devices powered on. Put the LumenDimIO Mode switch in the transmit
position. Connect a DMX data source to the XLR data input on the
LumenDimIO.
Tap the Link button. This button is recessed under the small slot to the right of
the blue RF Connect LED. Tap it with a small screwdriver or the end of a bent
paperclip.
The blue RF Connect LEDs on both devices
will flash for several seconds
and
then remain on, indicating that they are linked.
NOTE:
If DMX data is not present at the transmitter, the blue LED will blink
slowly rather than staying on.
8
MODE
PUSH
Link Button
