13
13
Non-Dim 100%
(80% or higher)
Use for relays, solenoids, air valves, etc.
Linear 70%
(60 - 79%)
For incandescent, halogen, tungsten lamps.
ISL Fast
50%
(40 - 59%)
For LEDs when fast blinks and flashes are required.
RC4 Digital Persistence™ is disabled.
ISL Slow
30%
(20 - 39%)
Best for typical LED applications, with RC4 Digital Persistence™
For super smooth 19-bit dimming. (default setting)
Choosing Other Dimmer Curves or Profiles
The LumenDimM4micro default is the ISL dimmer curve, which is best for LEDs.
This is also the curve that is selected with RC4 OneTouch™ when the DMX level
is at 30%.
There are dimmer curves for different kinds of lamps, motors, and more.
Detailed information can be found online by searching dimmer curves at
http://rc4.info/
.
The most common curves are selected using these DMX channel levels and
RC4 OneTouch™ with the Set buttons as outlined on page 9:
