3
RC4 LumenDimM4micro
1. DMX Data Indicator
2. Function and COP
2
Indicator
3. Function Button
4. SetAB and SetCD Buttons
5. DimA - DimD Indicators
6. RF Connect Indicator for Transmitter Linking
7. RF Connect (Link) Button
8. Male Connector Pins for Power In and Dimmer Outputs
9. DMX/RDM In/Out Data Port
10. Disconnectable Female IDC Connector
1
for Power In and Dimmer Outputs
11. Load Connection Wires (DimB +/- DimB +/-)
12. Power Connection Wires (DCin +/-)
1. Connector is Amp MTA-100-Series, 0.1” pin spacing. Shell color indicates wire gauge. Red shell is for
22 AWG wire, Amp connector P/N 3-641190-6. Numerous alternatives are available, each with different
P/Ns. Use the correct shell for the wire you are using. Amp also supplies crimping tools for these
connectors. One 22 AWG connector assembly is incuded with each LumenDimM4micro. Additional cable
assemblies are available from RC4 Wireless.
2. COP means “Computer Operating Properly.” This indicator always shows a blink pattern,
proving that internal firmware is running. Different patterns indicate various modes and
advanced settings.
3
