RC-TEK
RCT-80AGL ESC INSTRUCTION MANUAL
B. CHOOSING A PROGAM MENU ITEM
CAUTION:
When entering the program mode, the brushless motor will utter some tones circularly.
When you hear these tones, move the throttle stick of transmitter to the low point within 2 seconds
and enter the setting item, or brushless motor will utter next setting item tones. These tones are as
follows:
a. “di---” brake setting tone
b. “di—di---” battery type setting tone
c. “di---di---di---” low-voltage protection mode setting tone
d. “di---di---di---di---” low-voltage protection voltage value setting tone
e. “di---” startup mode setting tone
f. “di—di---” timing option setting tone
g. “di---di---di---” set to default setting tone
h. “di—di---” exit setting tone
C
.
ADJUST PROGRAM ITEM PARAMETER
CAUTION:
The brushless motor will utter several types of tones circularly after choosing the
setting item. After hearing these tones, if you move the throttle stick of transmitter to the top point
within 1 second, you have chosen the setting parameter which corresponds to the tones being heard
and the brushless motor will signal with a “di---”, which indicates the ESC has confirmed the setting
and written it to memory. If you do not want to set up any other parameters, you can move the
throttle stick to the low point within 2 seconds to exit the programming item menu. If you want to
go on setting up another parameter, please return to the step of “Choosing a Program Menu Item” to
proceed.
3
