RC-TEK
RCT-80AGL ESC INSTRUCTION MANUAL
4. THROTTLE SETTING INSTRUCTIONS:
Throttle setting is
ONLY
applicable when using the ESC for the first time or using the ESC to
match a new transmitter
A.
Turn on transmitter, move the throttle stick to the top point, switch on ESC power.
B.
There is “di---” sound on brushless motor, when ESC is turned on.
C.
Wait for 2 seconds, then brushless motor will utter “di---di---”, when the
throttle reaches the top
point.
D.
Move the throttle stick to the low point.
E.
Wait for 1 second, then brushless motor will utter “di---”, when throttle reaches the low point.
F.
When
brushless motor utters“di---di---di------di”, when all ready.
G.
Then you can use ESC.
5. PROCESS INSTRUCTIONS OF NORMAL USE
A.
Turn on transmitter, move the throttle stick to the low point.
B.
Brushless motor utters “di---”, when power is on.
C.
Brushless motor utters “di---di---di------di”, when all ready.
D.
The ESC is now ready for normal use.
6. ESC PROGRAMMING PROCESS
There are four steps:
A.
Enter programming
B.
Choose setting item.
C.
Choose parameter item under setting item.
D.
Exit.
A. ENTER PROGRAM MODE
A.
Turn on transmitter, move the throttle stick to the top point, and connect the ESC to power.
B.
Brushless motor utters “di---”, when power is connected correctly.
C.
Wait for 2 seconds, then brushless motor will utter “di---di---”.
D.
Go on waiting for 5 seconds, then brushless motor will utter “di---”, when program mode have
been engaged.
2
