RC Systems ViewSmart 200, User Manual

Page: 36 / 42

ViewSmart 200/2050/2150 Controller User's Manual
Document: UM-1021 Revision Level B
32
CHAN_1ALM_1 BIT0
CHAN_1ALM_2 BIT1
CHAN_1ALM_3 BIT2
CHAN_2ALM_1 BIT3
CHAN_2ALM_2 BIT4
CHAN_2ALM_3 BIT5
RELAY_1 BIT6
RELAY_2 BIT7
PIEZO BIT7
Memory Floating Point:
Notes: Returned as 15 bit 2s complement with +- 5% over/underrange applied.. Therefore this
must be considered when scaling values to be displayed at the Workstation. The following
equation may be used to determine a value for display.
Display Value = MODBUS Value [ (Span Value -Zero Value) 1.1] + {Zero Value - [(Span Value - Zero Value) .05]}
32767
FP Value Chan 1 33001 4 NA
FP Value Chan 2 33002 4 NA
Memory Reals:
Notes: Real value represents float value without the decimal point such as 123.4 is returned as
1234. Decimal devisor is returned as 1, 10, 100, or 1000 for decimal position of 1, 2, 3, or 4,
where 123.4 would return the value 10.
Chan 1 Zero Real 41001 3 NA
Chan 1 Zero Divisor 41002 3 NA
Chan 1 Span Real 41003 3 NA
Chan 1 Span Devisor 41004 3 NA
Chan 1 Alarm 1 Real 41005 3 NA
Chan 1 Alarm 1 Devisor 41006 3 NA
Chan 1 Alarm 2 Real 41007 3 NA
Chan 1 Alarm 2 Devisor 41008 3 NA
Chan 1 Alarm 3 Real 41009 3 NA
Chan 1 Alarm 3 Devisor 41010 3 NA
Chan 2 Zero Real 41011 3 NA
Chan 2 Zero Divisor 41012 3 NA
Chan 2 Span Real 41013 3 NA
Chan 2 Span Devisor 41014 3 NA
Chan 2 Alarm 1 Real 41015 3 NA
Chan 2 Alarm 1 Devisor 41016 3 NA
Chan 2 Alarm 2 Real 41017 3 NA
Chan 2 Alarm 2 Devisor 41018 3 NA
Chan 2 Alarm 3 Real 41019 3 NA
Chan 2 Alarm 3 Devisor 41020 3 NA
Binary Cal Data:
Chan 1 A2D MIN 41021 3 NA
Chan 1 A2D MAX 41022 3 NA
Chan 1 D2A MIN 41023 3 NA
Chan 1 D2A MAX 41024 3 NA
Chan 2 A2D MIN 41025 3 NA
Chan 2 A2D MAX 41026 3 NA
Chan 2 D2A MIN 41027 3 NA