RC Logger EYE OneCam 5.8 GHz RX, Operating Instructions Manual, Page: 24 / 188

24
20. ConneCTIng To a Tv or headPhone seT
headphones
You may connect a headphone set equipped with a 3.5 mm
stereo jack plug. Connect the jack plug to the jack av-ouT (16).
The volume must be adjusted on the headphone side.
Connecting to a Tv
You may connect the monitor to a TV or other display device,
supporting the PAL or NTSC standard.
1. Carefully read the operating instructions of the display
device you are about to connect the monitor to.
2. Set the output standard on the monitor. See chapter
“Sub-1 AV Out” on page 18.
3. Turn the monitor and TV/display device off.
4. Connect the 3.5 mm stereo jack of the AV OUT cable (20)
to the jack av-ouT (16).
5. Connect the RCA plugs of the AV OUT cable to your TV
or display device (yellow = video signal, red = right audio
channel, white = left audio channel).
6. Turn monitor and TV/display device on.
7. Video can now be played and displayed on TV or display
device.
21. use monITor as dIsPlay devICe
You may use the monitor as a display device by connecting
an external video playback device via the AV IN cable (19) to
the monitor.
1. Carefully read the operating instructions of the display
device you are about to connect the monitor to.
2. Turn the monitor and the external playback device off.
3. Connect the external playback device via the AV IN cable
to the monitor. The 2.5 mm stereo jack plug connects to
the jack av-In (15).
4. Turn the monitor and the external playback device on.
5. Start playback on the external playback device and the
video will be displayed on the monitor.
Optional use: Some devices (e.g. CCTV camera) need
an external power source to function. The power plug
on the supplied AV IN cable allows for that. However,
observe the playback device’s operating instructions
for the requirements and the chapter “Technical
specifications” on page 27.