RC Logger EYE OneCam 5.8 GHz RX, Operating Instructions Manual, Page: 20 / 188

20
3. Set the monitor to search for available channels
automatically or manually (auto search is off). If you
activate auto channel search then the monitor briefly
displays “AUTO” and starts flipping through the set
channels. You may manually flip through the channels with
buttons and .
4. Once pairing is complete the image is displayed on the
monitor’s display.
16. reCord vIdeo and PhoTo
To record video or photos follow these steps:
1. Turn the monitor on and connect a camera.
2. Switch the video switch (13) into position .
Taking photos
To take a photo press the button . The symbol will be
displayed briefly to confirm successful taking of photo.
recording video
> To record video, press and hold the button for approx.
3 seconds to start recording. “REC” (C) and the recording
time (I) are displayed.
> To pause recording press the button and the display
shows “ ”.
> To toggle muting of audio, press button m. This function
only applies to the built-in speaker (6). Output to connected
headphones cannot be muted.
> Press button to save recording and exit recording mode.
> Video size can be controlled via video segment sizes. See
section “Sub-1 Video Segment Size” on page 17 for more
information.
overwrite mode
See section “Sub-1 Overwrite” on page 17 for more
information. Whenever a video is saved, previously saved clips
are overwritten by the latest recording, once storage space is
full.