Wing Strut Assembly
Collect these parts.
ÿ
2 main wings
ÿ
1 wing tube
ÿ
2 ¼ 20 nylon wing bolts
ÿ
2 front wing struts (longer than rear wing struts)
ÿ
2 rear wing struts
ÿ
2 factory bent interplane wing struts
ÿ
2 lower wing cuffs
ÿ
2 upper wing cuffs
ÿ
2 lower wing strut/fuse mounting brackets
ÿ
4 632 x ½ socket head cap bolts
ÿ
8 632 x ¾ socket head cap bolts
ÿ
8 – interplane wing strut brackets
Slide the aluminum wing tube into the factory installed tube in the
fuse. Make sure an equal amount of tube is showing on both sides of
the fuse.
Carefully slide and position the wings on the fuse and secure them
to the fuse using the supplied ¼20 nylon wing bolts. You will
notice a wooden dowel is provided to align the wing in the proper
position on the fuse.
Note: Do not crush your servo extensions between the wings and fuse.
17