Rev: 2014.11.04.v001a
33
Apply a bead of Welders to the top of
the canopy as shown where it will
mount
Split the little gussets pieces down the
middle
Install the T-Canalizer while the glue is
still wet
Motor mount is next... Tack Up method
will be used. Apply a medium film of
Welders to both surfaces
Once the glue has tacked up, attach the
two pieces, making sure they are
located properly and fully seated to
each other
Install the wheels and pants. Brace up
the entire airframe so that when you
slide the axles into the slot on the strut
they are level and so that the wheel
pants are perpendiular to the bench
