Load
To load a pre-generated task you should upload the task file (.afg file) into the
RC/TSK folder on the SD card. After selecting the “LOAD” option, all .afg task
files in that folder will be shown. Select the required task file from the list and it
will be uploaded.
Save
The currently active task will be saved into the RC\TSK folder on the SD card
after pressing “SAVE”. You should edit the name of the task file. Moving the
navigation switch left or right selects which letter to edit. Moving the
navigation switch up or down changes the underlined letter. Pressing the
navigation switch confirms the name and generates an *.AFG file on the SD
card.
Note!
To use a saved file from the Skynavigator SW, you will have to rename the task file extension from *.AFG
to lower case letters *.afg . This is must be done on a PC.
Setup
This menu allows you to change the task start altitude and task distance. Press
Enter on the value you wish to change and move the navigation switch up/down
to change it. The task will be recalculated when you leave this menu.
Start
To start/restart the task, select the “START” option. On the Task navigation page “ARMED” text will be
displayed when start is triggered. The task time will automatically begin the count down when the plane
crosses the start line. A voice announcement will alert you when you select start/restart task.
Summary of Contents for T3000
Page 1: ......
Page 22: ... start time flight time average task speed legs flown ...
