Tested in hell - Driven on earth!
22
Spring cap short
DAMREFRPC10
Spring front silber 1.1mm
DAMSPFRS11H
thumb-screws
DAMREFRPC10
Shockbody front
DAMREFRPC10
Ball-Link
DAMREFRPC10
Bleeding the shocks:
1. Push in the pistonnrod.
2. When you feel pressure on top of the shockbody, it must be bleeded.
3. Pull out the pistonrod.
4. Loosen the shockcap 3/4 Turns and lean it slightly.
5. Push in the pistonrod smoothly to push out the excessive oil and air.
6. Tighten the cap while the pistonrod is still pushed inside the shock-body. Try the shock. if you are still
not satisfi ed, repeat steps 3 to 5.
