7
/
28
Battery and Charging
Steps to charge the battery
1.
Confirm that the local power supply corresponds with the requirement of the charger,
the input voltage is between 100V—240V.
2.
Switch your e-bike off on the main switch on the battery case.
3.
The battery can be charged on the e-bike or removed from the e-bike as shown.
4.
Connect the charger plug and charging port of the battery first, and then connect the
power plug and the power source.
5.
When the red light turns on the charging starts.
(1)Charge without the e-bike (2)Charge on the e-bike
Safety Charging
Care of the battery is vital to your safety and to maximize its long-term performance.
Battery fault fire or explosion hazard will occur if the instructions are not followed.
●
Ensure that the charger plugs are dry and securely connected to the charger port of
battery case.
Summary of Contents for Anaconda-2.1 2023
