21
/
28
The way of riding
Turn on the power
Plug in the key , turn on power switch. Turn the throttle slowly to drive the e-bike
forward. Remaining battery power displays on the panel after turn on the power.
The four lights from full to empty all on means fully charged. One light on means low
power state. when there is just one light on, turn off the battery power to charge the
battery in case it would effect the service life and function of the battery because of
the excessive discharge. When the power is so low that you can’t drive the e-bike
with power assistant, turn off the power in case it would effect the service life and
function of the battery because of the excessive discharge.
Power cut and the brake
To ensure the rider’s safety the motor will stop working when braking and restart
after release the brake.
Riding
1. Test every function of different switch before riding, then get used to the function of
the e-bike by controlling the brake and handlebar.
2. Turn the throttle slowly, then enjoy your riding.
3. Every cyclist should obey the traffic rules.
Summary of Contents for Anaconda-2.1 2023
