RBR#0008819revB
7
1.
2.
3.
3 Hardware
3.1 Opening and closing the instrument
.
Opening the instrument
Place the RBR
quartz
3
BPR
|
zero vertically with the battery end-cap up and the sensor end-cap down.
Alternatively, you can lay it on the side.
Unscrew and remove the two cap screws using a 5mm hex key.
Rest the battery end-cap on the side of the instrument, as shown.
Locations of cap screws
Open instrument, with the end-cap resting on the side
When opening the instrument, make sure to keep the O-rings clean and avoid scratching the O-ring mating
surfaces.
