background image

2

WWW.ROLLINGBIGPOWER.COM

STOP. DO NOT RETURN TO THE STORE. WE CAN HELP. QUESTIONS OR PROBLEMS, OUR TEAM OF 

PROFESSIONALS ARE HERE TO HELP.

CALL TOLL FREE 1-877-519-9090, MON-FRI: 8:00AM - 5:00PM PST 

2018 JEEP WRANGLER JL 4-DOOR RX3 SIDE STEPS

INSTALLATION INSTRUCTIONS

RBP-1510B-RX3
RX-3 STEP BARS

Our RX-3 step bars feature one-piece, welded steel construction, and a patented mesh design that’s an RBP original. The 
cab-length design snugly hugs your truck, as to not reduce ground clearance. The paintable, textured inserts allow you to 
customize your steps for a look truly your own. The RBP RX-3 step bars include all mounting brackets and instructions for 
easy installation. Featuring a new 3-year finish warranty on our black finish, and a limited lifetime on polished stainless, 
with additional protection against any manufacturer’s defects – you can be sure you are covered.

Passenger/right step assembly

Driver/left step assembly

PLEASE READ INSTRUCTIONS COMPLETELY BEFORE INSTALLATION. IF YOU DO NOT CLEARLY UNDERSTAND 
ANY PART OF INSTALLATION INSTRUCTIONS, DO NOT ATTEMPT TO INSTALL YOURSELF. HAVE A QUALIFIED 
PROFESSIONAL PERFORM INSTALLATION. RBP ASSUMES NO LIABILITY FOR ANY DAMAGE CAUSED BY IMPROPER 
USE AND/OR INSTALLATION OF ITS PRODUCTS.

FRONT

Your Complete Satisfaction is Our Number One Goal

At Rolling Big Power, your satisfaction is why we’re in business. If for any reason your experience with our product was 
anything less than satisfactory, please reach out to us. We’d love to have the opportunity to provide the product experience 
and service you deserve.

Summary of Contents for RBP-1510B-RX3












Reviews: