RBH Sound ProStereo H2, Owner'S Manual

Page: 9 / 12

H2 Bluetooth Stereo Headphones 7 Owner’s Manual
TROUBLESHOOTING
Q: I can’t hear any sound coming from my headphones?
A: • Ensure the headphones are turned on and charged properly
• Ensure the headphones are properly paired with the Bluetooth device.
• Make sure the Bluetooth device is connected through the Bluetooth menu on your device,
i.e. phone etc.
Q: I can’t connect my headphones with my mobile phone?
A: • Make sure the headphones have been turned on;
• Make sure the volume is not too low or muted;
• Make sure the headphones connects with the mobile phone correctly;
• Make sure the distance between the headphones and the cell phone is within the available
Bluetooth range.
Q: Why can’t I hear the sound clearly with the headphones?
A:
•
Make sure the mobile phone is in a strong signal area;
•
Make sure the headphones are within the available range of this product.
Q: What does it mean when red LED flashes instead of blue LED?
A: • Battery power is low, and it needs to be recharged.
SPECIFICATIONS
Bluetooth version
Bluetooth V4.2
Bluetooth profiles Headphones, hands free, A2DP, AVRCP
Operating distance
33 feet (10 meters)
Headphone music time
Up to 9 hours
Headphone talk time Up to 10 hours
Standby time
Up to 200 hours
Headphone charging time
Approx 2 hours
Water resistant rating IPX4
Frequency range
10Hz-20kHz
Dimension (headphone)
1.18” x .52” x .95” (30mmx13.3mmx24 mm)
Weight .46 oz. (13 grams)
NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
RESETTING THE EARPHONES
Reset Mode (hardware reset):
Connect the headphones to computer via Micro USB cable.
Simultaneously press for 3 seconds to empty paired device list. When LED flashes blue
and red for few seconds the headphones have been reset.