RBH Sound ProStereo H2, Owner'S Manual

Page: 7 / 12

H2 Bluetooth Stereo Headphones 5 Owner’s Manual
STEP

- MULTI-POINT (PAIRING WITH TWO MOBILE PHONES)
Multi-point allows simultaneous pairing of the headphones with two mobile phones follow the next
three steps to pair both phones.
1. Pair with the first mobile phone as normal then switch phone off.
2. Repeat pairing procedure with the second mobile phone.
3. Re-connect the first mobile phone with the Bluetooth cable via the phone menu.
NOTE: Turn on/off multi=point pairing: In the status of standby mode (not connected device),
hold MFB and volume up/down button for 3 seconds and release it until you hear four raise/fall
tones.
The H2 headphones are designed to work with Bluetooth devices. Due to the large variability
between different Bluetooth devices from different manufacturers, interoperability between the
headphones and all Bluetooth-enabled products is not guaranteed.
QUICK INSTALL GUIDE
(continued)
5
6
STEP
‘
- MUSIC SHARING
The H2 Bluetooth Stereo Headphones support the music sharing feature, allowing a H2 Headphones
the ability to share the playback music to another H2 Headphone through Bluetooth interface
such that the receiving H2 headphones can enjoy the same audio experience in Hi-Fi grade quality
as the transmitting H2 headphones. To enable the music sharing feature, both transmitting H2
headphones (A) and receiving H2 headphones (B) have to be first in standby mode. If either
headphone A or headphone B is already in music streaming mode, then music sharing feature
cannot be initialized. Steps to initialize the 3 sharing feature are below.
1. Long press volume down (–) button of the headphones A for 3 seconds to start sharing music
to the headphone B. The status indicator turns to purple breathing lighting style with a long
beep tone and wait for the connections with headphone B.
2. Long press volume up (+) button of the headphones B for 3 seconds to start sharing music to
the headphone A. The status indicator turns to purple breathing lighting style with a long beep
tone and wait for the connections with headphone A.