F-84F Thunderstreak 90mm edf
Pagina 31
Place the wing wiring extension leads into the openings in F26, we glued in the connectors with ca
Take wiring out on the side you prefer we had the receiver also in the side secured with some foam
Wing mounting:
Lay down the fuselage flat and connect the servo wiring, , mark the wiring and connectors
Slide in the wing carefully into the side it should go in light but tight , fasten the wing with the M3
fasteners , note that they are just to hold the wing in place and preventing the wing from coming out,
so not to tight not necessary.
Taking out the wing is a bit more difficult , you might need to wiggle a bit it will come out slow, just
take your time for this , after some time it will goes easyer, note that there may not be much play in
this connection it should be tight, if you can move the wing up and down you might fill the opening
with some thin ca to make up the space , if to tight carefully sand the dowels with fine sanding paper
