background image

RECHARGING AND MAINTAINING THE BATTER

Y

First time use please charge the battery overnight.

Subsequent use for 3 days keep the charging on even with Green light for additional 3 hours. 

After that recharging can be done until the indicator light changes to Green or about 8 hours.

 

CAUTION: DO NOT CHARGE THE BATTERY MORE THEN 12 HOURS

i. Connect  the  battery  charger  supplied  with  the  sprayer  to  the  3 -pole female

connector on the control panel. 

ii. Switch on the sprayer.

iii. Connect the battery to the main power supply and switch on. The red ‘charging’

and green ‘charged’ indicators will glow.

iv. The battery will be fully charged in approximately 8 hours.

v. After charging remove the charger from the main 

 

power supply and return the

 

switch to ‘OFF’ position to prevent slow battery discharge.

Charger should always be disconnected from the machine, as soon as the  battery is

fully charged.

Always store the fully charged  battery.

If the sprayer is to be stored for more than   one (1)month, it is recommended that the 

battery

 

is

 

disconnected. 

However the battery needs to be recharged every 2-3 months. 

 

With regular cleaning and battery maintenance the NEO DC SPRAYER should give 

many years trouble free operation. 
Simple  maintenance  involves  regularly  cleaning  the  sprayer  both  internally  and 

externally. It is also advised to carry spare CFValves ® (Red 1.5 Bar) and nozzle tips 

as these may become worn, blocked or damaged with regular use. 
Always ensure switch is in the OFF position when the sprayer is not in use to avoid 

battery  discharge  and  for  long  periods  of  storage  it  is  advised  to  disconnect  and 

remove the 12V sealed lead acid battery. 
Always  use  the  correct  battery  charger  as  supplied  with  the  sprayer,  to  maintain 

battery condition. 
Make sure electrical wires in the sprayer are not damaged with use. Repair/replace as 

necessary. 

MAINTENANCE

9

Summary of Contents for Neo DC



















Reviews: