RAZORBACK OFFROAD
™
7
(STEP 3.2)
Next, measure from the outside edge of the Mounted “IT FITS™” Mounting Arm (Now attached flush
to your rack). Once in place, set the distance equal to the recorded measurement that was taken on
page 4 in step 1.2.
(STEP 3.3)
Move the Base Arm for Spare Tire outward until its outer edge is equal to the distance you have mea-
sured for the Bore to Surface Measurement in Step 1.2. This is the minimum distance you will need to
attach your tire to the “IT FITS™” Adjustable Spare Tire Mount.
WRITE BORE TO SURFACE MEASUREMENT HERE:
Bore to Surface Distance
(FIG. 3.1)
See Figure 3.1
