background image

RAZORBACK OFFROAD

RA

Z

O

RB

ACK OF

FR

O

A

D

Important Information Read Carefully.

Keep This Information for Further Reference.

!

Copyright 2018 Inventive Edge, LLC dba RazorBack Offroad ™ (RBO) 

All information contained within this publication is based on the latest product information at the 

time of publication. Due to constant improvements in the design and quality of production 

components, some minor discrepancies may result between the actual parts and the information 

presented in this publication. Depictions and/or procedures in this publication are intended for 

reference use only. No liability can be accepted for omissions or inaccuracies. Any reprinting or reuse 

of the depictions and/or procedures contained within, whether whole or in part, is expressly prohibited.

Printed in U.S.A.

RBO1018 - “IT FITS™” Spare Tire Mount Operation Manual

DOC CONTROL NUMBER RBO0052

!

!

WARNING

!

!

!

Read, understand, and follow all of the instructions and safety 

precautions in this manual and on all product labels. 

Failure to follow the safety precautions could result in serious 

injury or death.

It is the operator’s responsibility to follow all manufacture’s 

recommendations regarding the safe operation of the vehicle. 

It is the installers responsibility to follow all manufacture’s 

recommendations and instructions regarding safe assembly 

and installation of an accessory.

It is up to the installer that each accessory is securely mounted.

Operator must use common sense when using any RBO 

accessory and when a loading rack so as not to affect the 

vehicle’s safe operation.

The IT Fits Spare Tire Mount is not rated for nor should be 

used as a step or hung from. 

The IT Fits Spare Tire Mount should not be used as a tie-down 

point for hanging items.

We recommend regular inspections and replacement of 

faulty O-ring to ensure the Lugs functions as designed and to 

prevent loss.

Adding mounts to the side and/or rear of the vehicle increases 

its size. RBO highly recommends that you only use the RBO1018 

IT FITS Spare Tire Mount on the RBO5040 Polaris RXR®900 

Expedition Rack™ (Jim Todd Edition)’s tailgate location.

Ignoring these cautions and warnings could increase the 

potential for accidents that could result in serious injury or death.

Summary of Contents for IT FITS

















Reviews: