Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
7
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
7
USAGE
How to Ride
Do not activate the remote unless you are on the RipStik Rush and in a safe, outdoor environment suitable
for riding.
Turn power button to the “ON” position for both the RipStik Rush and the remote.
Place one foot on the front deck plate and with the other foot, push (kick start) RipStik Rush
while
holding the lever
on the remote in the “GO” position. Place other foot on rear deck plate once motor has engaged.
How to Stop
The RipStik Rush, like regular RipStiks or skateboards does not have a conventional “brake”, however the RipStik Rush
can coast to a stop or can use “dynamic motor braking” to slow more quickly.
1
While riding, release the
remote lever and it will return to
the “NEUTRAL” position. The
product will slow to a stop with
motor resistance.
Note:
Stepping off the product also works to stop. Releasing the remote
lever will cut power to the motor.
2
To slow more rapidly to a stop,
move the remote lever down to the
“STOP” position and hold. This will
engage dynamic motor braking
and the product will slow down
more quickly.
Note:
Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under the limited warranty.
Note: RipStik Rush must be
moving at least 3 mph (5 km/h),
with lever on remote in GO
position, for motor to engage.
Note:
As an additional safety
feature, the RipStik Rush is designed
to cut power to the motor when the
lever on the remote is in the “STOP”
or neutral position.
Note:
Motor will re-engage,
(without having to kick start), if
the remote is in the “GO” position
before
RipStik Rush has slowed
down to
under 3 mph (5 km/h)
.
